Helpful tips on Generator Set Fault |
When fault occurs during generator set running,could do primary judgement according to following tips. |
Icon |
Indicator Light |
Reason |
Fault Analysis and Solve Method |
High Water Temperature Alarm |
High Water Temperature Alarm |
When water Temperature has risen to a level higher than or equal to the sensor setting,the light is on. |
Normally,it is caused by lack of Water or Oil Shortage,or Overload. ----Should Automatically Shutdown Generator set Immediately. |
Low Oil Pressure Alarm |
Low Oil Pressure Alarm |
When water Temperature has risen to a level higher than or equal to the sensor setting,the light is on. |
Normally,it is because of lack of Oil or Lubrication System Failure which caused by refueling or replacing the Oil Filter.----- When occurs this fault,should automatically shutdown generator set immediately. |
Low Fuel Level Alarm |
Low Fuel Level Alarm |
When Fuel level has been detected by sensor fitted to the daily tank,the light is off. |
Normally,it caused by lacking of Water or Oil Shortage,or Overload.-----When occures this Fault,should automatically shutdown Generator set Immediately. |
Battery Charger Fault Alarm |
Battery Charger Fault Alarm |
The Charing System has fault while engine still running,the light is off. |
Battery Charging System Fault Caused.---The light in on at the initial Start,when the charger reaches a certain speed,the light is off.---This Failure will not lead to Automatic Shutdown Generating Unit. |
Crank Failure Alarm |
Crank Failure Alarm |
When Generator set fail three times(or six times) in arow starting,the light is on |
It is caused by Oil Supply System or Re-Start System Failure. |
Overload or Breaker Tripping Alarm |
Overload or Breaker Tripping Alarm |
When Overloading or Short Circuit,the light is on. Tripping Circuit Breaker cause generator set load out. |
For this fault,it needs to load or unload some parts to eliminate short-Circuit,and then re-close the circuit Breaker. |